Telstar silver lava lamp SES bulbs – 3 pack

£18.00

30% Off when you spend £65 or more
This pack of three 35W capsule bulbs comes with an SES (screw fit) adaptor and are a substitute for 28W reflector bulbs. New Mathmos silver Telstars are all supplied with GU10 fittings, if you are buying replacement bulbs for older Telstars please check your lamp to see which fitting you have. These robust capsule bulbs are developed specially for use in Mathmos silver Telstar lava lamps to create the right amount of heat and light. NB. These bulbs are suitable for Mathmos Telstars in silver only, not other colour metal finishes.
Mathmos Telstar silver lava lamp SES bulbs - 3 pack

Free Delivery with no customs charges within 2 – 5 days
More info here

No quibble returns
More info here

Multiple Secure Payment Methods
We accept these following payment types:
payment_types

More info here

Specifications & Instructions

Light: 35W G9 230 – 240V Capsule bulb
Notice: This bulb is primarily used as a heat source. For Mathmos lava lamps only. Not for household room illumination. Suitable for operation at ambient temperature ≥ 300°C. For use in high-temperature applications.
Lifespan1500h
Colour temp2700K
Lumens300lm
kWh/1000h35
CRI99
Height42mm
Diameter14mm
Energy Label G
See datasheet (pdf) Bulb Care and handling IMPORTANT! FITTING MATHMOS HALOGEN CAPSULE BULBS
  1. Handle the bulb with great care; halogen bulbs are extremely delicate.
  2. Allow the bulb to warm to room temperature.
  3. Make sure your lava lamp is in the correct location.
  4. Carefully screw the adapter into the socket until it stops rotating.
  5. Use a tissue to hold the bulb; deposits on our fingers can damage the bulb. Carefully push the capsule bulb into the adapter slot until it fits into place firmly.
  6. Gently place the bottle on the base.
  7. Turn the lamp on using the inline switch.
Important
  1. Never touch the bulb or the lamp when it is on.
  2. Allow the light to cool for one hour before touching the bulb or lamp.
  3. Do not run your lava lamp for more than 6 hours at any one time.
  4. Always leave the bottle sitting on the base when you turn it on.

Browse other categories